4Published Feb. 12, 2015
Introduction: Baking Soda Reinforcing Glue Repair
About: Why pay for stuff when you can make, build, hack, macgyver it. They are better and cheaper 100% DIY. More About Engineer of None »
Super glue its an amazing tool to have on any toolbox, the applications are virtually unlimited.
Making the perfect tool to repair plastics and other things, the idea for this project is taking this tool to the next level.
One of the common repair to do is filling an reinforcing pieces, cracks, holes and gaps.
On this project i will show you how to grab a simple ingredient like baking soda add to the glue and create a super bond.Add TipAsk QuestionCommentDownload
Step 1: Watch the Video
Watch the video and see how easy it is to make this project.
With step by step instructions.
Add TipAsk QuestionCommentDownload
Step 2: Gather the Material
You will need for this project:
– Baking Soda
– Super Glue
– Masking Tape
– Pen Cap
– Metal File
Step 3: Get Started
The first step is checking if the piece that you want to fix is clean so that the glue stick to it.
For example if you want to fill a gap, grab the baking soda and fill that gap, if you want you can build up layer by layer.
Then apply the super glue on top of the baking soda, you will notice that the small grains of the baking soda will soak super fast the glue and also cure making a rock solid bond.
Last step will be filing to shape, and if you want paint too.
Step 4: Final Thoughts
This is a very cheap hack to reinforcing an filling a fragile piece, works also with other materials.
You can also use this to cure really fast super glue.
Please subscribe to my YouTube channel.
And follow me on Instructables.
Baking Soda – Superglue Composites
In the fall of 2010, as part of my Mechanics of Solids course, I undertook a project examining the mechanical properties of baking soda-superglue composites. I’d first heard of using baking soda and superglue together through an interview with Adam Savage (of MythBusters fame) published in MAKE: Magazine. Savage listed it as one of his favorite maker “tricks” – simply layering superglue and baking soda to make a versatile material that could be used to attach, fill gaps, pot or rebuild. I have subsequently used this technique in a wide variety of situations, from eyeglass repair to prototyping.
My goals in this project were to: a) determine the optimal production method for this material, b) determine what mechanical properties of the material would be of greatest interest given the material’s uses, and c) rigorously determine those mechanical properties. It became clear early on in the project that the optimal method of production – a “layering” process in which alternate layers of superglue and baking soda are built up – would make anisotropy in the material a significant concern. Consequently, basic tensile tests (following ASTM D638) were conducted with tension applied both normal to the layer plane and parallel to the layer plane.
Results indicated an average modulus of elasticity of 27.5 kPsi for the tension-parallel samples (17.1 kPsi for tension-normal samples), and an average ultimate strength of 2.49 kPsi (1.04 kPsi). Although the strength of the material normal to the layer plane is significantly lower than that parallel to the layer plane, it is still unclear whether anisotropy is a concern, primarily because of inconsistencies in the tension-normal samples.
This project was made possible by the generosity of Permabond Engineering Adhesives, which donated 2 lbs. of Permabond 268 superglue for use in this project.
2 THOUGHTS ON “BAKING SODA – SUPERGLUE COMPOSITES”
- wakawaka on April 4, 2014 at 3:59 am said:I have used that composite alot and found that layering technique is important. And compressing layers for few seconds significally improves strength.Reply ↓
- jordan on May 28, 2018 at 9:31 pm said:i couldn’t find any baking soda at my apartment last night when something broke and i needed to fill in the cracks and broken off glass, so i looked around the place for an alternative. i thought about using baby powder, but I also couldn’t find any of that either. then i went to my office and ground down white chalk for my chalk board, and used that with superglue. oddly enough, i found that chalk actually worked better than baking soda. the chalk is extremely hard. after grinding and sanding you can barely even tell that a large piece of glass had broken off of the object, except of course that it was a slightly different color than the off-white glass.